A Ready‐to‐Use Electrochemical Kit Design for the Diagnosis of Single Nucleotide Polymorphisms

In this study, for the first time a model electrochemical kit was constructed for the detection of a functional polymorphism in catechol‐O‐methyl transferase (COMT) gene which is important for diagnosis of neuropsychiatric disorders as Alzheimer disease. The disposable pencil graphite electrode (PGE) is designed as a “kit” and the probe DNA covered PGE can detect single nucleotide polymorphisms (SNPs) from real samples based on the guanine oxidation signal even after 5 months of kit preparation (150 days durability).The detection limit (S/N=3) of the biosensor was calculated as 1.18 pmol of synthetic target sequence and 6.09×10⁵ molecules of real samples in 30 min detection time.     

18O同位素标记定量肽段串联体蛋白质结合同位素稀释-多反应监测质谱的蛋白质绝对定量新方法

建立了定量肽段串联体蛋白质(concatamers of Q peptides, QconCATs)结合¹⁸O同位素标记-多反应监测质谱的蛋白质绝对定量新方法。首先对QconCAT重组蛋白质进行了纯度表征,十二烷基硫酸钠-聚丙烯酰胺凝胶电泳(SDS-PAGE)表征结果表明重组蛋白质的纯度在99%以上,相对分子质量约为63.4 kDa。对QconCAT重组蛋白质酶切后的肽段混合物进行质谱分析,并经pFind和pLabel软件处理,验证了目标肽段。还考察了QconCAT重组蛋白质的酶切效率和¹⁸O标记效率,并对QconCAT蛋白质结合¹⁸O标记-同位素稀释-多反应监测质谱方法进行了评价。实验结果表明,采用该方法对腾冲嗜热厌氧菌(Thermoanaerobacter tengcongensis, TTE)中选定蛋白质的肽段进行绝对含量测定时,相对标准偏差小于20%,准确度较高,说明该方法可用于复杂生物样本中蛋白质的绝对定量。更重要的是所建方法不仅解决了细胞培养氨基酸稳定同位素标记(SILAC)技术的重标试剂价格昂贵的问题,也为定量蛋白质组学提供了一种新的方法。     

钪元素对AB2型合金Zr1-xScxMn0.6V0.2Ni1.2Co0.1（x=0～1）储氢和电化学性能的影响

用真空电弧熔炼方法制备了Zr1-xScxMn0.6V0.2Ni1.2Co0.1(x=0～1)AB2型储氢合金,研究了Sc元素替代Zr对合金的微观组织结构、气态储氢及电化学性能的影响。研究结果表明,Zr1-xScxMn0.6V0.2Ni1.2Co0.1合金主要是由FCC型C15相、CsCl型结构的(ScZr)Ni相和少量的Ni10Zr7相组成,随Sc含量的增加,C15相丰度逐渐减小,(ScZr)Ni相丰度逐渐增加,当x=0.2时Ni10Zr7相基本消失;Sc元素对合金的首次气态吸氢动力学行为影响较大,随Sc含量的增加,合金吸氢动力学性能逐渐变缓,但吸氢容量逐渐提高,直至达x=1.0时的最大吸氢量1.87%;Sc元素对合金吸氢PCT曲线平衡氢压的影响规律不明显,随Sc含量增加,合金氢化物的形成焓ΔH从-26.66 kJ.mol-1逐渐减小到-8.14 kJ.mol-1。Sc元素的加入可明显改善合金电极的活化性能,提高放电容量,随Sc含量的增加,合金电极最大放电容量从x=0时的350.3 mAh.g-1增加到x=1时的429.8 mAh.g-1,呈先减小后增大的趋势,但电极容量的保持率S100随Sc含量增加而快速下降。     

石墨烯的制备、功能化及在化学中的应用

石墨烯是最近发现的一种具有二维平面结构的碳纳米材料, 它的特殊单原子层结构使其具有许多独特的物理化学性质. 有关石墨烯的基础和应用研究已成为当前的前沿和热点课题之一. 本文仅就目前石墨烯的制备方法、功能化方法以及在化学领域中的应用作一综述, 重点阐述石墨烯应用于化学修饰电极、化学电源、催化剂和药物载体以及气体传感器等方面的研究进展, 并对石墨烯在相关领域的应用前景作了展望.     

固态研磨-燃烧法制CuO-ZnO-ZrO2/HZSM-5二甲醚合成催化剂

以柠檬酸为燃烧剂,采用固态研磨-燃烧法和机械混合法制备了CuO-ZnO-ZrO2/HZSM-5CO2加氢一步合成二甲醚双功能催化剂.采用固定床反应器,在反应温度270℃、压力为3.0 MPa、空速4 200 h-1条件下,考察了催化剂对CO2加氢一步合成二甲醚的反应性能,并采用XRD、BET、H2-TPR、NH3-TPD及XPS对催化剂的结构进行了表征.评价结果表明:随柠檬酸量的增加,二甲醚选择性和收率呈峰形变化趋势;当柠檬酸的量等于化学计量比的100%时,制备的催化剂具有较好的催化性能:CO2单程转化率为24.8%、二甲醚(DME)的选择性和收率分别为35.3%和8.7%.表征结果表明:柠檬酸的量影响催化剂的比表面积、还原性能以及CuO和ZnO的晶粒尺寸等,进而影响催化剂反应性能.     

Ni-La/CexZr1-xO2对甲烷部分氧化/CH4-CO2重整耦合制合成气的催化剂制备及反应性能

通过共沉淀法制备铈锆固溶体作为载体,采用等体积、分步浸渍的方法制备了一系列10% Ni-3% La/CexZr1-xO2（X=0、0.16、0.5、0.75、1）催化剂,并将其应用到甲烷部分氧化和甲烷二氧化碳重整耦合制合成气的反应中。对不同Ce/Zr比的催化剂性能展开研究,采用XRD、H2-TPR、SEM手段对载体及催化剂进行了表征。结果表明,铈锆固溶体的形成不仅提高了催化剂表面活性组分的分散度,使催化剂表面NiO晶粒尺寸从26.5 nm减到13.7 nm;而且能够加强活性组分与载体之间的相互作用,提高催化剂的热稳定性能;随着Ce/Zr比的增加,催化剂的转化率、选择性及稳定性随之增强,其关系为：Ni-La/Ce0.75Zr0.25O2 > Ni-La/Ce0.5Zr0.5O2 > Ni-La/Ce0.16Zr0.84O2。     

Encapsulation of Phenolphthalein pH-Indicator into a Sol-Gel Matrix

Transparent monolithic silica doping with phenolphthalein has been prepared via the acid-catalyzed sol-gel reactions of tetraethylorthosilicate in the presence of phenolphthalein. The immobilized phenolphthalein pH-indicator shows similar behavior as its solution counterpart. The UV/Vis spectra indicate that the phenolphthalein retains its structure during the sol-gel reactions in terms of response to pH. The phenolphthalein can be regarded as uniformly distributed in the silica matrix. This observation has been confirmed using polarized microscopy.     

Studies of Nucleophilic Substitution Reactions of p‐Nitrophenyl Acetate with Some Dihydroxamate Ions in Cationic Micellar Media

Pseudo‐first‐order rate constants have been determined for the nucleophilic substitution reactions of p‐nitrophenyl acetate with oxalo, malono, and succinodihydroxamate ions (^?ONHC(O)(CH₂)_nC(O)NHO^?) in phosphate buffer (pH=7.9) at 27°C. The rate data of the reaction revealed that the nucleophilic reactivity sequence of these hydroxamate ions is generally ODHA>MDHA>SDHA. The k_obs value increases upon addition of cationic surfactants to the reaction medium which is typical behavior of micelle‐assisted bimolecular reactions. The pseudo‐phase ion exchange model has been successfully applied to determine binding constant.     

Water PMF for predicting the properties of water molecules in protein binding site

Water is an important component in living systems and deserves better understanding in chemistry and biology. However, due to the difficulty of investigating the water functions in protein structures, it is usually ignored in computational modeling, especially in the field of computer‐aided drug design. Here, using the potential of mean forces (PMFs) approach, we constructed a water PMF (wPMF) based on 3946 non‐redundant high resolution crystal structures. The extracted wPMF potential was first used to investigate the structure pattern of water and analyze the residue hydrophilicity. Then, the relationship between wPMF score and the B factor value of crystal waters was studied. It was found that wPMF agrees well with some previously reported experimental observations. In addition, the wPMF score was also tested in parallel with 3D‐RISM to measure the ability of retrieving experimentally observed waters, and showed comparable performance but with much less computational cost. In the end, we proposed a grid‐based clustering scheme together with a distance weighted wPMF score to further extend wPMF to predict the potential hydration sites of protein structure. From the test, this approach can predict the hydration site at the accuracy about 80% when the calculated score lower than ?4.0. It also allows the assessment of whether or not a given water molecule should be targeted for displacement in ligand design. Overall, the wPMF presented here provides an optional solution to many water related computational modeling problems, some of which can be highly valuable as part of a rational drug design strategy. © 2012 Wiley Periodicals, Inc.     

Metallomicellar Catalysis: Hydrolysis of Phosphodiester with Cu(II) and Zn(II) Complexes in Micellar Solution

Abstract

The effects of two metal complexes of 2,2′‐dipyridylamine (bpya) ligand, [(bpya)Cu]Cl₂ and [(bpya)Zn]Cl₂, in promoting the hydrolysis of bis(4‐nitrophenyl) phosphate (BNPP) have been kinetically investigated in Brij35 micellar solution and at 298 K, pH ranging from 6.41 to 8.6. In neutral micellar solution at 298 K, pH 7.02, the rate constants for the catalytic hydrolysis of BNPP by [(bpya)Cu]Cl₂ and [(bpya)Zn]Cl₂ are 1.2 × 10⁶ times and 1.5 × 10⁵ times higher than those for the spontaneous hydrolysis, respectively. Kinetic studies show that the active species in the catalytic hydrolysis of BNPP is the aquo‐hydroxy form, and the relative kinetic and thermodynamic parameters indicate that the mechanism of the reaction involves intramolecular nucleophilic attack on the metal center‐bound diester.